Jiangxi Gandong Mining Equipment Machinery Manufacturer Factory

Products

	Shaking Table/Concentrator Table/Gravity Table

Shaking Table/Concentrator Table/Gravity Table

Click to enlarge image

Origin	China
Model Number	6-S
Brand Name	Gandong Equipment

Products Description : Application of shaking table:

Concentrating Tables are designed to wet gravity-based separation of minerals and other granular materials.

There are many applicatioins where the concentrating tabl is of particular value and cannot be equaled for economical andefficient performance. They are effective in processing precious and base metal,rare metal and non-metallic minerals.

Construction:

Head Motion: The head motion is of rugged construction and requires minimum maintenace. Its internal mechanism is splash lubricated from an intergral oil sump.

Deck: The decks are built of 16mm zircon-reinforced fiberflass with fabricated steel frames at the bottom and are easy to clean, requiring little maintenance. The specific gravity of fiberglass made into decks is one third of that of steel, while its strength as high as 70% that of steel.The fiberglass decks also have the characteristic of water-resistance and corrosion-resistance and can hold the shape unchangeable.

Feed and Water Box: A wooden feed distributing box with hopper and a long water box are attached to the iron of the deck, giving a very even distribution of feed and water.

Base: A choice of ordinary type, groove steel support or big channel steel support is available.

Technical Specification:

The Gandong Shaking Tables have the three distrinct deck designs available.

The course ore deck is designed for recovering particles sized from 0.5mm to 2mm; the fine sand deck is designed for recovering fine particles in the range of 0.074mm to0.5mm; the slime deck is designed for recovering super extremely fine particles in the range of 0.05mm to 0.074mm.

Name		Unit	Coarse Ore Deck	Fine Sand Deck	slime Deck
Bed surface size	Length	mm	4450	4450	4450
	Transmission end width	mm	1855	1855	1855
	Ore concentrate end width	mm	1546	1546	1546
Maximum Feeding Size		mm	2	0.5	0.15
Feeding Amount		t/d	30-60	10-20	15-25
Feeding Density		%	25-30	20-25	15-25
Stroke		mm	16-22	11-16	8-16
Frequency		f	45-48	18-53	50-57
Water Added		t/d	80-150	30-60	10-17
Transverse Slope of Deck		度	2°30-4°30	1°30-3°30	1°-2°
Longitudinal Slop of Deck		%	1.4	0.92	-----
Transverse Slope Rate Longitudinal Slope		°	32°-42°	40°	42°
Befefication Area		M²	7.6	7.6	7.6
Bed surface length ratio			2.6	2.6	2.6
Cross-section Shape of Deck			Rectangle	Denticle	Triangle
Model Power		KW	1.1	1.1	1.1
Transmission Mechanism			Eccentric linkage

	6-S Shaking table
	6-S Shaking table (groove steel bracket) The table (groove steel bracket) has the same effect as the ordinary support. It has the following characteristic: it does not need the cement to bury the foot bolt in advance, installs and uses quickly, is easy to disassemble, may move, and the cost is relatively inexpensive.
	6-S Shaking table (Big channel steel support) The 6S table (big channel steel support) has the same effect as the ordinary support. It has the following characteristic: it does not need the cement to bury the foot bolt in advance, installs and uses quickly, is easy to disassemble, and may move. Is suitable specially for in the surface uneven, not the solid sand and the empty superficial work. Specially it? suitable for work in the surface which is uneven, void ,and not the solid sand.